| ISO 8510-2 |
ISO 8510-2 - Adhesives -- Peel test for a flexible-bonded-to-rigid test specimen assembly -- Part 2: 180 degree peel |
| ISO 6452 |
ISO 6452 - Rubber- or plastics-coated fabrics -- Determination of fogging characteristics of trim materials in the interior of automobiles
|
| ISO 5636 |
ISO 5636 -- Paper and board -- Determination of air permeance and air resistance (medium range) |
| ISO 4593 |
ISO 4593 - Plastics -- Film and sheeting -- Determination of thickness by mechanical scanning |
| ISO 3034 |
ISO 3034 - Corrugated fibreboard -- Determination of single sheet thickness |
| ISO 1974 |
ISO 1974 - Paper -- Determination of tearing resistance -- Elmendorf method |
| ISO 15106-1 |
ISO 15106-1 - Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 1: Humidity detection sensor method |
| ISO 14616 |
ISO 14616 - Plastics -- Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures -- Determination of shrinkage stress and contraction stress |
| ISO 8295 |
ISO 8295 - Plastics -- Film and sheeting -- Determination of the coefficients of friction |
| ISO 6383-2 |
ISO 6383-2 - Plastics -- Film and sheeting -- Determination of tear resistance -- Part 2: Elmendorf method |
| ISO 534 |
ISO 534 - Paper and board -- Determination of thickness, density and specific volume |
| ISO 4587 |
ISO 4587 - Adhesives -- Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies |
| ISO 2556 |
ISO 2556 - Plastics -- Determination of the gas transmission rate of films and thin sheets under atmospheric pressure -- Manometric method |
| ISO 15106-3 |
ISO 15106-3 - Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 3: Electrolytic detection sensor method |
| ISO 9237 |
ISO 9237 - Textiles -- Determination of the permeability of fabrics to air |
| ISO 7765-1 |
ISO 7765-1 - Plastics film and sheeting -- Determination of impact resistance by the free-falling dart method -- Part 1: Staircase methods |
| ISO 6383-1 |
ISO 6383-1 - Plastics -- Film and sheeting -- Determination of tear resistance -- Part 1: Trouser tear method |
| ISO 4638 |
ISO 4638 - Polymeric materials, cellular flexible -- Determination of air flow permeability |
| ISO 11607 |
ISO 11607 - Packaging for Terminally Sterilized Medical Devices - Medical Device Package Validation |
| YBB00082003 |
YBB00082003 - Determination of the amount of gas permeability for Medical & Pharmaceutical Packaging Industry Standard |
| GB/T 19789 |
GB/T 19789 - Packaging materials. Test method for oxygen gas permeability characteristics of plastic film and sheeting. Coulometric sensor |
| ASTM F1307 |
ASTM F1307 - Standard Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor |
| ASTM F2622 |
ASTM F2622 - Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors
|
| JIS K 7126-2 |
JIS K 7126-2 - プラスチック−フィルム及びシート− ガス透過度試験方法−第2部：等圧法 |
| JIS K 7126-1 |
JIS K 7126-1 - プラスチック−フィルム及びシート− ガス透過度試験方法−第1部：差圧法 |
| ISO 15105-2 |
ISO 15105-2 - Plastics -- Film and sheeting -- Determination of gas-transmission rate -- Part 2: Equal-pressure method |
| ISO 15105-1 |
ISO 15105-1 - Plastics -- Film and sheeting -- Determination of gas-transmission rate -- Part 1: Differential-pressure methods
|
| ASTM F1927 |
ASTM F1927 - Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
|
| ASTM F1307 |
ASTM F1307 - Standard Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor
|
| ASTM D3985 |
ASTM D3985 - Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor |